
ISO zone indication, spectrum and waveform
ISO 20816-3 zone indication for velocity is shown on the meter as you take the reading, by machine group and foundation type. Per axis, the meter stores overall values, a spectrum and a time waveform.
Triaxial vibration analyzer with temperature and strobe
The IRD 3V is a triaxial vibration analyzer with infrared temperature and an LED strobe. It captures horizontal, vertical and axial vibration at the same time, in one placement — H, V and A in one take. Walk a route, see ISO zone indication on the meter, and upload to IRD 1View over USB‑C.
EnquireIRD 1View

ISO 20816-3 zone indication for velocity is shown on the meter as you take the reading, by machine group and foundation type. Per axis, the meter stores overall values, a spectrum and a time waveform.

A built-in LED stroboscope — also usable as a torch — and a non-contact infrared thermometer, in the same role as on the IRD202 VST. The windows sit on the rear face of the head: a larger strobe lens and a smaller IR window, side by side, so the display faces you while you aim at the machine. The top end keeps the sensor connector and USB‑C only.
A triaxial accelerometer is supplied as standard. Three IEPE channels are sampled at the same time, so one placement captures horizontal, vertical and axial vibration with no time gap between axes.
On each axis, measure acceleration, velocity and displacement as RMS and peak — and displacement as peak-to-peak — plus crest factor.
A 2.4" high-brightness IPS colour display, in landscape, and a 6-key sealed membrane keypad: POWER, UP, SAVE, BACK, DOWN and OK.
A sealed lithium-ion battery with all-day battery life, and USB‑C charging.
Supplied with a National Traceable calibration certificate. 1-year warranty. IRD Mechanalysis has made vibration instruments since 1955.
Take readings along a route and log them on the meter. Connect over USB‑C to IRD 1View, IRD Mechanalysis PC software for route-based condition monitoring. Build a route on the PC, load it onto the IRD 3V, collect in the field, upload, then trend, list exceptions and report.
The IRD 3V is the triaxial model in the IRD 1View family: three-axis vibration at one placement, plus temperature and strobe, with route collection and IRD 1View.

The entry model: a single-axis handheld vibration meter for overall vibration values, with USB‑C upload to IRD 1View.

A vibration, strobe and infrared temperature meter that also works with IRD 1View.

This model
The triaxial model: H, V and A in one take, plus temperature and strobe, with USB‑C upload to IRD 1View.
The IRD 3V is a triaxial vibration analyzer. It measures acceleration, velocity and displacement on all three axes at once, shows ISO 20816-3 zone indication for velocity, and includes a non-contact infrared thermometer and an LED strobe.
A triaxial accelerometer is supplied as standard. Three IEPE channels are sampled at the same time through one connector, so a single placement captures horizontal, vertical and axial vibration with no time gap between axes.
On the rear face of the head: a larger strobe lens and a smaller infrared window, side by side. The display faces you while you aim at the machine. The top end of the head keeps the sensor connector and USB‑C only.
Build a route in IRD 1View, load it onto the IRD 3V, collect readings in the field, and upload them over USB‑C. You can then trend the readings, list exceptions and report.
It has a sealed lithium-ion battery with all-day battery life, and charges over USB‑C.
Every IRD 3V is supplied with a National Traceable calibration certificate and a 1-year warranty.
No. The IRD 3V does not include automatic fault diagnosis or a bearing-frequency database.
Please enquire, or email sales@irdmech.com.
Email sales@irdmech.com.
Enquire