IRD Mechanalysis Limited
Currency
0

Loop-Powered 4-20 mA Vibration Sensor – IRD5420

Quick Links

Introduction

The IRD5420 is IRD Mechanalysis’s loop-powered 4-20 mA vibration sensor (also called a vibration transmitter) for continuous monitoring of rotating machines such as pumps, motors, fans and compressors. It outputs a linear 4-20 mA signal proportional to vibration velocity in mm/s RMS, with 4 mA at zero vibration and 20 mA at the chosen full scale, and connects to a PLC, DCS or SCADA system on the same two power wires. The SS316L case is rated −5 to +140 °C. Available ranges are 0–10, 0–20, 0–25 and 0–50 mm/s RMS, with a 1/4-28 UNF female mount and top-exit MS connector. Made in India, with a 3-year warranty and no minimum order quantity.

IRD5420 loop-powered 4-20 mA vibration sensor in SS316L, top-exit MS connector with protective cap, labelled 0-25 mm/s RMS

Typical Connection Scheme

IRD5420 loop-powered 4-20 mA vibration sensor wiring diagram to PLC, DCS and SCADA

One Sensor - many benefits

IRD5420 is an affordable, rugged and easy solution for round-the-clock 24x7, 365-day vibration monitoring on a standard 4-20 mA loop. Case: SS316L. Operating temperature: −5 to +140 °C. Ranges: 0–10, 0–20, 0–25 and 0–50 mm/s RMS. Mount: 1/4"-28 UNF female, top-exit MS connector. Cable: 2-core or 4-core (2 pins active). Warranty: 3 years. Made in India.

Be it just 1 Sensor or 500+ sensors - we have no MOQ for this product and you can request a quote for as many as you need. We provide Mounting Pads, Studs and Connecting Cables (of required length) along with the Sensor. Junction boxes and loop-powered local display units are also available to support your IRD5420 setup.


Feel free to email us your requirements on sales@irdmech.com OR give us a call on +91-2248972000 (Monday to Saturday 9 AM to 6 PM IST)

Simple Installation

Stud mount onto a 1/4"-28 UNF thread-tapped surface or a Mounting Pad. Top-exit MS connector with 2-core or 4-core cable (2 pins active) keeps wiring simple.

Accuracy and Precision

Linear 4-20 mA output proportional to the chosen full-scale range (0–10, 0–20, 0–25 or 0–50 mm/s RMS). 4 mA at zero vibration and 20 mA at full scale. SS316L case, −5 to +140 °C.

Scalable

Can connect directly to PLC/SCADA/DCS Analog Input and consumes very less power and can be installed in all directions and on as many bearing points as required for Contact Vibration Measurement

Cloud Ready

Using 4-20 mA to MODBUS and/or 4-20 mA to MQTT converters/Gateways - the sensor result can easily be integrated to Cloud applications like Zoho IoT, Statstream and more

​​Data Sheets

Sr. No.Item DescriptionItem SKU (Stock Keeping Unit)Data Sheet Download Link
1IRD5420 Loop Powered 4-20 mA Vibration Sensor, 0-10 mm/s RMS, SS316L, 1/4"-28 UNF female, top-exit MS connectorIRD5420-10-RMSIRD5420-10-RMS Data Sheet
2IRD5420 Loop Powered 4-20 mA Vibration Sensor, 0-20 mm/s RMS, SS316L, 1/4"-28 UNF female, top-exit MS connectorIRD5420-20-RMSIRD5420-20-RMS Data Sheet
3IRD5420 Loop Powered 4-20 mA Vibration Sensor, 0-25 mm/s RMS, SS316L, 1/4"-28 UNF female, top-exit MS connectorIRD5420-25-RMSIRD5420-25-RMS Data Sheet
4IRD5420 Loop Powered 4-20 mA Vibration Sensor, 0-50 mm/s RMS, SS316L, 1/4"-28 UNF female, top-exit MS connectorIRD5420-50-RMSIRD5420-50-RMS Data Sheet

Frequently asked questions

What is a loop-powered 4-20 mA vibration sensor?

The IRD5420 is a loop-powered 4-20 mA vibration sensor, also called a vibration transmitter. It provides a linear 4-20 mA output proportional to vibration velocity in mm/s RMS and is used for continuous monitoring of rotating machines.

How does the IRD5420 connect to a PLC, DCS or SCADA system?

It connects to a PLC, DCS or SCADA analog input on the same two power wires as the 4-20 mA loop. A 2-core or 4-core cable can be used (2 pins active) with the top-exit MS connector.

What do 4 mA and 20 mA mean on the IRD5420?

At zero vibration the output is 4 mA DC. At the chosen full-scale range the output is 20 mA DC.

What mm/s RMS ranges are available?

The IRD5420 is available in 0–10, 0–20, 0–25 and 0–50 mm/s RMS. The output is linear across the chosen full-scale range.

How is the IRD5420 mounted?

It is stud-mounted onto a 1/4-28 UNF thread-tapped surface or a mounting pad. The connector is a top-exit MS connector. Mounting pads, studs and connecting cables are available with the sensor, and junction boxes and loop-powered local display units can support the setup.

Where is the IRD5420 made, and what is the warranty?

The IRD5420 is made in India and carries a 3-year warranty. There is no minimum order quantity. For a quote, email sales@irdmech.com or call +91-2248972000, Monday to Saturday, 9 AM to 6 PM IST.

​​Buy Online

Pick a Mounting Pad, Mounting Stud, Cable, Sensor and Junction Box in the quantities required. Loop-powered local display units are available on request — email sales@irdmech.com. Add them to Cart and Checkout to Purchase. After Purchase our Team will get in touch with you for Delivery Updates. If you would like to Buy Offline - please send us your requirements at sales@irdmech.com to get a quote

Junction Boxes

Junction boxes for your IRD5420 setup. View options and details on our Junction Box page.

Items have been added to cart.
One or more items could not be added to cart due to certain restrictions.
Close
Added to cart
- There was an error adding to cart. Please try again.
Quantity updated
- An error occurred. Please try again later.
Deleted from cart
- Can't delete this product from the cart at the moment. Please try again later.