IRD202 VST Kit - Vibration, Strobe and Temperature Meter



Portable instrument · Made in India since 1955
IRD202 VSTVibration, Strobe and Temperature Meter
The IRD202 VST Kit is a handheld vibration, strobe and temperature meter designed and made in India by IRD Mechanalysis. With a single IRD521 accelerometer it measures machine vibration as acceleration, velocity and displacement, and checks bearing health with gSE. A built-in stroboscope and torch, and a non-contact infrared thermometer, are in the same instrument. Routes you build in IRD 1View are collected on the meter and uploaded over USB-C for trends, exceptions and reports.
and IR temperature
trends and reports
data in one port
Traceable calibration
In the meter
Vibration and bearing health
Measure acceleration, velocity and displacement with the IRD521 accelerometer (100 mV/g). Bearing health is read as gSE. Velocity is colour-coded by ISO 20816-3 severity zone.
Built-in strobe and torch
Use the built-in stroboscope to freeze rotating parts and read running speed. A torch mode is built into the same lamp.
IR temperature
Take non-contact infrared temperature readings on bearings, housings and other surfaces, then store them with the rest of the route.
USB-C charging and data
A sealed 3.7 V 3000 mAh Li-ion battery charges over USB-C. The same port connects the meter to IRD 1View on the PC.
Route-based data collection with IRD 1View
IRD 1View is IRD Mechanalysis PC software for route-based data collection. Use it with the IRD202 VST to plan the route, collect on the plant floor, and review the results at the desk.
- Connect the meter to the PC over the USB-C port, used for data and for charging. The meter clock can be set from the PC.
- Build and download a route — organise the plant as Plant › Area › Machine › Point, set the walking order, and load the route onto the meter.
- Collect vibration, infrared temperature and strobe RPM at each point in the field.
- Upload overall route readings — velocity, acceleration, gSE (bearing envelope), displacement, infrared temperature and strobe RPM — with ISO zone. If an upload is interrupted, 1View keeps what was already received and the rest stays on the meter, so you can resume. A failed route download does not leave a partial route on the meter.
- Trend, list exceptions and report with ISO zone colour bands (A green, B yellow, C orange, D red). Export PDF, Excel and CSV.

What’s in the kit
- One IRD202 VST meter (vibration, strobe/torch and IR temperature)
- One IRD521 accelerometer (100 mV/g)
- One coiled 2-pin kit cable (GX12 2-pin at the meter)
- USB-C cable
- 20 kg magnet
- Stinger
- EW3309 hard case
- National Traceable calibration certificate
- Quick-start guide and 1-year warranty card
Specifications
| Vibration | Acceleration, velocity and displacement |
|---|---|
| Bearing health | gSE |
| Severity indication | Colour-coded velocity by ISO 20816-3 zones A–D |
| Strobe | Built-in stroboscope and torch |
| Temperature | Non-contact infrared |
| Sensor | IRD521 IEPE accelerometer, 100 mV/g |
| Sensor connection | Coiled kit cable, GX12 2-pin at the meter |
| PC software | IRD 1View — route download and upload over USB-C, trends, exceptions and reports |
| Interface / charging | USB-C (data and charging) |
| Battery | Sealed 3.7 V 3000 mAh Li-ion, USB-C charging |
| Calibration | National Traceable certificate supplied |
| Warranty | 1 year |
Typical uses
- Route-based checks on motors, pumps, fans and blowers
- Early bearing-defect screening using gSE
- Non-contact temperature on bearings and housings
- Running-speed checks with the built-in strobe
- Trends, exceptions and reports in IRD 1View
Frequently asked questions
What does the IRD202 VST measure?
Vibration as acceleration, velocity and displacement, bearing health as gSE, non-contact infrared temperature, and running speed with the built-in strobe. Velocity is colour-coded by ISO 20816-3 severity zone.
What is IRD 1View?
IRD 1View is IRD Mechanalysis PC software for route-based data collection. You build a plant and a route on the PC, load the route onto the IRD202 VST, collect readings in the field, upload them, then trend, list exceptions and report. See the IRD 1View page.
How does it connect to the PC?
Over the meter’s USB-C port, the same port used for charging.
How is it charged?
Through USB-C. The battery is a sealed 3.7 V 3000 mAh Li-ion pack.
What is the warranty?
The IRD202 VST carries a 1-year warranty.
Do you calibrate it?
Yes. Every meter is supplied with a National Traceable calibration certificate. IRD calibrates the IRD202 VST together with its IRD521 sensor.
Need a quotation or a demonstration? Email sales@irdmech.com.
