IRD202 Elite Kit - Vibration Meter and Bearing Health Checker with Memory
Portable vibration meter and bearing health checker with memory.
- Measures acceleration, velocity and displacement (RMS, peak, peak-to-peak; metric or imperial) plus Spike Energy (gSE) for early bearing faults.
- Saves date/time-stamped readings and exports them to Excel via the IRD202 Data Explorer PC software.
- 4000 mAh rechargeable battery, charged over USB-C.
IRD202 Elite – Vibration Meter and Bearing Health Checker with Memory
The IRD202 Elite is a portable vibration meter and bearing health checker designed and made in India by IRD Mechanalysis. With a single accelerometer it measures machine vibration as acceleration, velocity and displacement, in metric or imperial units, as RMS, peak or peak-to-peak values. It also measures Spike Energy (gSE), IRD's long-established method for spotting early anti-friction bearing problems.
Unlike a basic meter, the IRD202 remembers what it measures. The technician sets the instrument's date and time and saves on-screen readings with a time stamp. Back at the desk, the readings transfer over USB-C to the Windows-based IRD202 Data Explorer software, where they can be viewed by parameter and unit and exported to Excel for reports and trending.
The meter runs on a 4000 mAh lithium-polymer battery that charges through the same USB-C port used for data transfer. It works with the IRD521 accelerometer (2-pin, IEPE/ICP, 100 mV/g); any IEPE/ICP 2-pin, 100 mV/g accelerometer can be used. IRD also offers calibration of the IRD202 together with its IRD521 sensor.
Specifications
| Parameter | Value |
|---|---|
| Acceleration | g pk, g RMS, m/s² pk, m/s² RMS |
| Velocity | mm/s pk, mm/s RMS, in/s pk, in/s RMS |
| Displacement | µm pk-pk, µm pk, mils pk-pk, mils pk, mm pk-pk, mm pk |
| Bearing condition | Spike Energy (gSE) |
| Sensor input | IEPE/ICP 2-pin accelerometer, 100 mV/g (IRD521) |
| Memory | Date/time-stamped readings |
| PC software | IRD202 Data Explorer (Windows), Excel export |
| Interface / charging | USB-C |
| Battery | 4000 mAh Li-Po, rechargeable |
Typical uses
- Routine route checks on motors, pumps, fans and blowers
- Early bearing-defect screening using Spike Energy (gSE)
- Acceptance checks after repair or alignment
- Simple trend records in Excel for maintenance reports
Frequently asked questions
Which sensor does the IRD202 use?
The IRD521 accelerometer (100 mV/g, 2-pin). Any IEPE/ICP 100 mV/g 2-pin accelerometer also works.
Can I save readings?
Yes. Readings are saved with date and time stamps, transferred to IRD202 Data Explorer, and can be exported to Excel.
How is it charged?
Through USB-C, the same port used for data transfer.
How is the IRD202 different from the IRD811D Pro?
The IRD202 adds memory and PC export, and uses a USB-C rechargeable battery (the IRD811D uses a 9V rechargeable battery).
Do you calibrate it?
Yes. IRD offers calibration of the IRD202 together with its IRD521 sensor.
Need a quotation or a demo?
| Request a Quote |
Or call 022-4897 2000